High Temperature pressure sensitive, TFE, coated fiberglass and uncoated fiberglass tapes.
VAC-PAK HS-8171 PS
High temperature, high elongation nylon 6 carrier with a rubber base adhesive. Leaves no residue after 400°F cures
FLASHTAPE 1
High temperature, multi-purpose, blue 1 mil polyester substrate with a fully cured silicone adhesive. Leaves no residue after 400°F cures
FLASHTAPE 2
Same as our Flashtape 1, but with 2 mil polyester substrate
FLASHTAPE 5
Same as our Flashtape 1, but with 5 mil polyester substrate
FLASHTAPE 1R
High temperature, multi-purpose, green 1 mil polyester substrate with a high temperature rubber adhesive. Leaves no residue after 400°F cures
FLASHTAPE 2R
Same as our Flashtape 1R, but with a 2 mil polyester substrate
FLASHTAPE 5R
Same as our Flashtape 1R, but with a 5 mil polyester substrate
TOOLCOAT
Adhesive backed TFE coated fiberglass, with a fully cured silicone or acrylic adhesive for curing at temperatures up to 550°F
TOOLCOAT S/T
Skived TFE pressure sensitive tape with a fully cured silicone or acrylic adhesive for curing at temperatures up to 550°F
SERIES 6325
Polyimide pressure sensitive tape with a fully cured silicone adhesive for curing at temperatures up to 800°F
RAPHOLD 1
High temperature “double backed” tape suitable for general-purpose use for curing at temperatures up to 400°F
RAPHOLD 10
High tack “double backed” hold down tape suitable for honeycomb core or foam hold down in machining and general-purpose work
Stay Connected